Home > SHOP BY CATEGORY > HAND TOOLS & SUPPLIES > LIFTING & MOVING > Grabo Pro Lifter Kit
Alternative Views:	Base Price: $310.53 Sale Price: $289.00 Savings: $21.53 Product Code: GP-1LI-FB Qty:

Description Specifications   The handle is also equipped with a digital display that shows the maximum weight that the GRABO Pro can safely lift at that very moment. The weight is displayed in both pounds and kgs. The Pro-Lifter is equipped with a smart digital pressure sensor. This makes it even more effective on different surfaces. With a simple press of a button the lifting function is automatically activated and regulated. The sensor automatically provides for the optimum level of suction, keeping objects in complete control whether the object is being lifted or even during movement. The digital display on the grab handle shows the pressure applied in both bars and psi. With the pressure sensors, you don’t have to worry about turning the vacuum pump on or off. In fact, the automatic sensor is especially useful when lifting and moving coarse materials. The sensors digitally detect and maintain the required pressure while transferring the object being lifted . This provides for precision handling and installation without too much of a hassle. In any case the sensor automatically stops the pump on reaching maximum vacuum capacity of 11.6 PSI. However, if you want to lift and move objects that have lighter mass, then the vacuum pump can be turned off. When you want to remove the tool from the object you simply push the red vacuum release button. The tool operates on 14.8 volts 2600 mAh Li-ion removable battery. The battery takes two hours for a full charge. On a full charge, this powerful battery can last for 900 cycles or 1.5 hours on non-stop running. The battery lasts for a whopping 30 days on standby mode. Just like the Classic model, GRABO PRO is also equipped with four lifting lugs placed on both sides of the grab handle. These lugs become handy in case the tool is to be used with additional grips or straps for support. The GRABO Pro has been rigorously tested by professionals around the world. Given its compact design and competitive performance, the Pro Lifter is rapidly becoming a tool of choice, especially in the construction industry around the world. Battery: 14.8VDC 2600mAh Li-ion Rated Power: 16W Charger Input Voltage: 100-240VAC 50/60Hz Battery Charging Time: ~2hrs Non-Stop Running Time (Full Charge): 1.5hrs Running Cycles (On Full Charge): 900 ON-OFF cycles of 10 seconds Stand-by Mode (Charge Hold): 30 days Pump Service Life: 100000+ ON-OFF cycles / 800+ hrs continuous Rated Air Flow: 0.7cfm (20 L/min) Maximum Vacuum Rate: 11.6Psi (0.8 Bar, 80 kPa) Maximum Lifting Capacity: 375 lbs. (170 kg) L x W x H 11.77 x 7.22 x 4.76” (300 x 184 x 121 mm) Net Weight (With Battery): 3.2 lbs. ( 1.5 kg ) Working Temperature: 32°F~140°F ( 0°~60 °C ) Applicable Surface Type: Peak/valley heights less than 0.1” (3mm), arc less than 5° Features Pump stops automatically at maximum vacuum rate ( 11.6Psi / 0.8 Bar ) Equipped with a smart digital level Browse for more products in the same category as this item: Aardwolf ASL200 Curb Scissor Lifer Nemo Grabo Lifter Kit with Battery Seal & Charger Grabo ErGuo S1 Lifting Attachment Probst Paver Extractor Sale Price: $989.00 Sale Price: $179.00 Sale Price: $89.00 Sale Price: $230.40 Probst EASYGRIP EXG MAXI Border Stone Handle Probst Slab Grabber Probst Grabo Solo Carry Handles Sale Price: $986.40 Sale Price: $108.90 Sale Price: $199.80

Share your knowledge of this product. Be the first to write a review »